Before embroidering your project, sew a trial sample of the pattern on a scrap piece of fabric
that is the same as that used for your project. In addition, use the correct needle and thread.

•

Be sure to affix stabilizer material to the back of the fabric and tightly stretch the fabric within
the embroidery frame. When embroidering on thin or stretch fabrics, use two layers of stabilizer
material. If no stabilizer material is used, the fabric may become over-stretched or wrinkled or
the embroidery may not be sewn correctly.

•

Use the zigzag stitch for sewing the outlines in order to prevent embroidering outside the out-
lines.

•

For patterns that require the embroidery frame
to be installed at different installation posi-
tions, design the embroidery pattern data so
that the various parts of the pattern overlap in
order to prevent misalignment while embroi-
dering.