Brother PE-DESIGN Ver.432 - Manual (Page 80)

70
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
and stitch at this step (see “Applying the sewing attributes to an outline” on page 69).
The
Sewing Attribute Setting dialog for the selected stitch displays.
Line (part) Setting Mode
In this mode, you can apply the current sewing attributes to a portion of the outline. You can also change
the sewing attributes applied to a portion of the outline.
A single line of the outline extends from both sides of the cursor position to the next branch points.
■ Applying the sewing attributes to a portion of the outline
1
Click on the Tool Box.
The shape of the cursor changes to and is displayed together with a small figure of the Tool
Box button. The Sewing Attributes bar now looks like this:
You can select the stitch at this step or after applying them to a portion of the outline. See “Stitch”
on page 76. The color cannot be set separately for a portion of the outline. If you set a portion of
the outline before setting the whole outline, the default color will be black.
2 You can also use the menu (see “Sewing Attributes” on page 92) or the method described on page
71 (Checking the sewing attributes of a portion of an outline) to define the characteristics of the
stitch. If you do not make these settings now, the current settings will be applied, but you can mod-
ify them later.
◆ If necessary, change the settings.
See “Sewing Attributes” on page 92.
• To restore the default value of a set-
ting after changing it, click the
Default
button at the left of that setting.
◆ To apply the new settings to the out-
line, then click the outline of the pat-
tern(s) using the left button.
◆ Click Close to remove the dialog from
the screen.