Line (all) setting mode, Applying the sewing attributes to an outline, Checking the sewing attributes of an outline – Brother PE-DESIGN Ver.432 User Manual
Page 79: Applying the sewing attributes to an outline 1, Checking the sewing attributes of an outline 1
69
Line (all) Setting Mode
In this mode, you can apply the current sewing attributes to the outline of patterns. You can also change
the sewing attributes applied to outlines.
■
Applying the sewing attributes to an outline
1
Click
on the Tool Box.
The shape of the cursor changes to
and is displayed together with a small figure of the Tool
Box button. The Sewing Attributes bar now looks like this:
You can select the color and stitch at this step or after applying them to the outline. See “Color” on
page 75 and “Stitch” on page 76.
You can also use the menu (See “Sewing Attributes” on page 92) or the following method to define
the characteristics of the stitch. If you do not make these settings now, the current settings will be
applied, but you can modify them later.
2
Click the outline that you want to set.
The color and stitch selected on the Sewing Attributes bar are applied to the clicked outline.
■
Checking the sewing attributes of an outline
1
Click
on the Tool Box.
The shape of the cursor changes to
and is displayed together with a small figure of the Tool
Box button.
2
Click the outline using the mouse’s right button.
The Sewing Attributes bar shows the color and stitch for the selection. You can change the color