Brother PE-DESIGN Ver.432 User Manual
Page 105

95
Note on the Programmable Fill Stitch:
When setting the stitch and pattern directions of a programmable stitch, take note that whenever
the stitch and pattern direction settings cause the stitch to be sewn in the same direction as a line
in a stitch pattern, that line will not be sewn.
Use the preview function of your application to view exactly how your stitch pattern will be sewn
and set the stitch direction and pattern direction according to the selected stitch or to the effect
that you want to produce. To get an even better view, make test samples of different settings.
Example of a programmable fill stitch:
See also:
“Preview” on page 99, “Programmable Stitch Creator” on page 211
Pattern Size
Width
Sets the pattern width (the direction along the line).
Range: 2 - 10 mm (0.08 - 0.39 inch
Default: 5 mm (0.20 inch)
Height
Sets the pattern height (the direction perpendicular to the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
H-Arrange
(Horizontal Arrange)
Sets the horizontal arrangement of the
pattern. For patterns like , patterns will
be arranged along the line as shown to the
right.
V-Arrange
(Vertical Arrange)
Sets the vertical arrangement of the pat-
tern. For patterns like , patterns will be
arranged along the line as shown to the
right.
Row Offset
When the pattern arrangement is offset, sets the amount of
offset for each row.
Range: 0 - 10 mm (0.00 - 0.39 inch)
Default: 0 mm (0.00 inch)
Direction
Allows you to rotate the angle of the Motif patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Run Pitch
Sets the pitch of the sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate:
Example 2:
Stitch direction: 90˚
Example 1:
Stitch direction: Default: 45˚
Example 3:
Stitch direction: 0˚