Brother PE-DESIGN Ver.432 User Manual
Page 65

55
If the pattern shown below at the right is written to an original card and the written pattern is
checked on the embroidering machine, it will appears as follows.
Therefore, the frame installation position sewing order for the pattern shown above is b, a, then c.
2
Writing data to an original card using File Utility.
When writing data to a card using File Utility, all of the data is written at the same time, like 1
explained above.
However, the difference is that if there is space on the card, other patterns can also be written to
the card.
: This pattern is sewn when the embroidery
frame is installed at the top installation posi-
tion (position a).
: This pattern is sewn when the embroidery
frame is installed at the middle installation
position (position b).
: This pattern is sewn when the embroidery
frame is installed at the bottom installation
position (position c).