Lengthens the sewing region in the stitch pattern’s sewing direction to pre-
vent pattern shrinkage during sewing.
Range:0 - 2 mm (0.00 - 0.08 inch)
Default:0 mm (0.00 inch)

Fill stitch only:

Step Pitch

Sets the pitch of the steps.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 4.0 mm (0.16 inch)

Frequency

Sets the spacial frequency steps.
Range: 0 - 99%
Default: 30%

Programmable fill stitch only:

Pattern

Select a pattern for Programmable Fill Stitch.
Click

Select Pattern

, and the

Browse

dialog opens. Select the

folder containing the pas file you want to open. Scroll through
the available stitch patterns and double-click the desired pat-
tern or click

to select the pattern.

Pattern Size

Width

Sets the stitch pattern width.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)

Height

Sets the stitch pattern height.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)

Offset

Direction

Sets the offset arrangement of the pattern, and sets the direc-
tion of offset as Row/Column.

Value

When the pattern’s arrangement is offset, sets the amount of
offset.
Range: 0 - 99 %
Default: 0 %

Pattern Direction

Allows you to rotate the angle of the stitch patterns.
Range: 0 - 359 degrees
Default: 0 degrees

Motif stitch only:

Use Pattern

Selects whether to use pattern 1 or pattern 2 for Motif. If you
choose to use both patterns, the data is created so that sewing
is alternated between them after each row.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2

Pattern

Select a pattern for Motif sewing.
Click

Select Pattern

, and the

Browse

dialog will display. Select

the folder containing the

pmf

file you want to open. Scroll

through the available stitch patterns and double-click the
desired pattern or click

to select the pattern

0˚

45˚

90˚

135˚

179˚

Step pitch

30%