Open – Brother PE-DESIGN Ver.432 User Manual
Page 91
81
When From Image is selected
When you click the From Image button from the dialog on page 79, the following dialog opens.
Position the mouse pointer over any button and the name of the action will display.
The functions for each button are described below.
◆
Open Image File
Opens a previously saved image file and pastes it in the Design Page.
For details, see the section in File – “Open” about image files (page 81).
◆
From TWAIN device
Import an image from a TWAIN device and paste it in the Design Page.
For details, see File – “Input from TWAIN device” (page 83).
◆
From Clipboard
Pastes an image from the clipboard in the Design page. This function can only be used when
there is an image on the clipboard.
For details, see File – “Input from Clipboard” (page 83).
◆
Use Current image
Use an image opened in Stage 1. This function can only be used when an image is opeded in
Stage 1.
◆
Previous
Closes the current dialog, and returns to the selection dialog from the previous step.
◆
Cancel
Closes this dialog.
If any button other than
Previous/Cancel
is clicked, the image importing operation will take place,
and the image will be pasted on the Stage 1 Design Page. After that, the Cut out to Line Image
dialog, which lets you choose colors for outlines, will open. You can then continue with creating
normal embroidery data.
For directions on that topic, see Stage – “To Line Image” (page 104).
After that, continue through the steps Stage – “To Figure Handle” (page 106) and Stage – “To Sew
Setting” (page 108) to create the data. For details, see those sections in the manual.
■
Open
Purpose:
Opens a previously saved file (*.PEM, *.PEL) or image file (Windows BMP
(*.bmp), Exif (*.tif, *.jpg), ZSoftPCX (*.pcx), Windows Meta File (*.wmf), Portable
Network Graphics (*.png), Encapsulated PostScript (*.eps), Kodak PhotoCD
(*.pcd), FlashPix (*.fpx).
NOTE:
For pcd and fpx files that are saved on many pages, only the first page can be
opened. Tif files that have used LZW compression can not be opened.
Shortcut key:
+
Toolbar:
Ctrl
O