Setting geometrical attributes, Arc shape, Edge radius – Brother PE-DESIGN Ver.432 User Manual
Page 146: Arc shape • edge radius
136
Setting Geometrical Attributes
■
Arc shape
Purpose:
Selects the type of arc.
Available:
When you click
on the Tool Box to start the Circle and Arc Drawing mode.
Operation:
1
Click the Arc shape selector.
The options display.
2
Click one of the options.
The setting applies to all the patterns that you will create in the Circle and Arc Drawing mode until
you change the setting.
See also:
“Circle and Arc Drawing Mode” on page 128
■
Edge radius
Purpose:
Sets the corners of rectangles.
Available:
When you click
on the Tool Box to start the Rectangle Drawing mode.
When you select an existing rectangle with the cursor in Selection mode.
Embroidery attributes
Line sew: Switches the outline on/off. When the outline is
switched off, it is not sewn (and you cannot set its color or
stitch).
Region sew: Switches the inside region on/off. When the
inside region is switched off, it is not sewn (and you cannot set
its color or stitch).
Line color, Region color, Text color, Punch color: Sets the
thread color for outline, region inside, text, manual punching
pattern and imported pattern (after the Stitch to Block function
has been applied).
Line sew type: Sets the stitch for the outlines.
Region sew type: Sets the stitch for outline, region inside, text,
manual punching pattern and imported pattern (after the Stitch
to Block function has been applied).