Appendix a - scpi common command/query definitions, A.1 introduction, Table a-1. ieee 488.2 command/query index – KEPCO BOP 1KW-MG Operator Manual, Firmware Ver.2.01 to 2.37 User Manual

Page 141: A.2 cls — clear status command, A.3 ese — standard event status enable command

BIT 4886 022108

A-1

APPENDIX A - SCPI COMMON COMMAND/QUERY DEFINITIONS

A.1

INTRODUCTION

This appendix defines the SCPI common commands and queries used with the BOP power supply.
Common commands and queries are preceded by an asterisk (*) and are defined and explained in
paragraphs A.2 through A.18, arranged in alphabetical order. Table A-1 provides a quick reference
of all SCPI common commands and queries used in the Interface Card.

A.2

*CLS — CLEAR STATUS COMMAND

*CLS

Syntax:

*CLS

Description: Clears status data. Clears the error queue of the instrument. Forces power supply to “operation com-

plete idle” and “operation complete query” state. Clears all Event Registers summarized in Status Byte
Register without affecting the corresponding Enable Registers: Standard Event Status Register (ESR),
Operation Status Event Register, Questionable Status Event Register, and Status Byte Register
(STB). Related commands: *OPC, *OPC?. (See example, Figure A-1.)

A.3

*ESE — STANDARD EVENT STATUS ENABLE COMMAND

*ESE

Syntax:

*ESE where = positive whole number: 0 to 255 per Table A-2.
Default Value: 0

Description: This command programs the standard Event Status Enable register bits. The contents function

as a mask to determine which events of the Event Status Register (ESR) are allowed to set the ESB
(Event Summary Bit) of the Status Byte Register. Enables the Standard events to be summarized in
the Status Byte register (1 = set = enable function, 0 = reset = disable function). All of the enabled
events of the standard Event Status Enable register are logically ORed to cause ESB (bit 5) of the Sta-
tus Byte Register to be set (1 = set = enable, 0 = reset = disable)

(See example, Figure A-1.)

TABLE A-1. IEEE 488.2 COMMAND/QUERY INDEX

COMMAND

PAR.

COMMAND

PAR.

*CLS

A.2

*RST

A.11

*ESE, ?

A.3, A.4