GW Instek GDS-1000A Series User Manual - Manual (Page 89)

CONFIGURATION
89
USB Port Interface
The USB port can be set to auto detect, however occasionally the
USB host type cannot be detected. The USB Port function allows the
USB host type to be manually or automatically set.
USB connection PC / Printer end Type A, host
GDS-1000A end Type B, slave
Speed 1.1/2.0 (full speed)
Procedure 1. Connect the USB cable to
the USB slave port on the
GDS-1000A.
2. Insert the other end of the
USB cable into the PC or
Printer USB port.
3. Press the Utility key. Utility
4. Press More (F5).
5. Press USB Port repeatedly to
set the host device .
Range Printer, PC, Auto Detect