GW Instek GDS-1000A Series User Manual - Manual (Page 74)

GDS-1000A Series User Manual
74
Horizontal Adjustment Menu
Background The horizontal adjustment menu allows markers to
be set at different times relative to the Horizontal
position marker at 0 seconds. Each marker is
linked to the mark directly before and after (in
time). There can be up to 30 markers linked
together.
1. Press the Horizontal menu
key twice to enter the
horizontal adjustment menu
MENU MENU
2. Press H Pos Adj to toggle
between coarse and fine
adjustments.
3. Adjust the horizontal
position with the horizontal
position knob.
Set marker 4. Press Set/Clear to create a
marker at the current
horizontal position.
Delete marker 5. If there is already a marker
at the current horizontal
position press Set/Clear to
delete the current marker.
Reset horizontal
position 6. Press Reset to reset the
horizontal position to 0
seconds when the trigger is
running, or to the last
position before the trigger
was stopped.