GW Instek GDS-1000A Series User Manual - Manual (Page 66)

GDS-1000A Series User Manual
66
Delay Off
With Delay Off the expansion point and trigger
point are always in the same position. Thus when
the horizontal scale is adjusted, the waveform
expands from the trigger point.
Procedure 1. Press the Acquire key. Acquire
2. Press Delay On/Off to
toggle Delay On/Off.
3. Use the Horizontal Position
knob to increase or decrease
the delay time when Delay
is set to On.
4. Adjust the horizontal scale
to zoom into the waveform.
TIME/DIV