GW Instek GDS-1000A Series User Manual - Manual (Page 43)

MEASUREMENT
43
M
EASUREMENT
The Measurement chapter describes how to
properly observe a signal using the oscilloscope’s
basic functions, and how to observe a signal in a
detailed manner using some of the advanced
functions such as :
Automatic measurements, cursor measurements,
and math operations.
Basic Measurements
This section describes the basic operations required in capturing and
viewing an input signal. For more detailed operations, see the
following chapters.
 Measurements → from page43
 Configurations → from page63
Activating a channel
Activating a
channel To activate an input channel,
press the Channel key, CH1 or
CH2. The channel indicator
appears at the left side of the
display and the channel icon
changes accordingly. CH 1
or
CH 2
(Continued on next page)