GW Instek GDS-1000A Series User Manual - Manual (Page 113)

SAVE/RECALL
113
3. Press Recall Setup.
4. Press Source repeatedly to
select the file source,
internal or external
memory. Use the Variable
knob to change the memory.
VARIABLE
Memory Internal memory, S1 ~ S15
SD card External card, no practical
limitation on the amount of file. The
setup file must be placed in the root
directory to be recognized.
5. Press Recall to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Note
The file will not be recalled if the
power is turned Off or the SD card
is disconnected before completion.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page98.
Recalling a waveform
Procedure 1. (For recalling from an
external SD card) Insert the
card into the slot.
2. Press the Save/Recall key. Save/Recall