GW Instek GDS-1000A Series User Manual - Manual (Page 104)

GDS-1000A Series User Manual
104
Saving the panel settings
Procedure 1. (For saving to an external
SD card) Insert the card into
the slot.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recall Save/Recall
3. Press Save Setup.
4. Press Destination repeatedly
to select the saved location.
Use the Variable knob to
change the internal memory
location (S1 ~ S15).
VARIABLE
Memory Internal memory, S1 ~ S15
SD card External card, no practical
limitation for the amount of file.
When saved, the setup file will be
placed in the root directory.
5. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.