GW Instek GDS-1000A Series User Manual - Manual (Page 109)

SAVE/RECALL
109
SD 1M Save to the SD card with a 1M
waveform memory length. For 2
channel operation only.
SD 2M Save to the SD card with a 2M
waveform memory length. For
single channel operation only.
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.
It takes approximately 1 min to save
a 2M waveform to the SD card in
fast mode. Detailed mode may take
over 10 times longer depending on
the speed of the SD card.
7. Together with the current setup/waveform/
image, the last saved waveform file (one from
W1 ~ W15) and setup file (one from S1 ~ S15)
are also included in the folder.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page98.