GW Instek GDS-1000A Series User Manual - Manual (Page 112)

GDS-1000A Series User Manual
112
Recalling a reference waveform to the display
Procedure 1. The reference waveform must be stored in
advance. See page 105 for details.
2. Press the Save/Recall key. Save/Recall
3. Press Display Refs. The
reference waveform display
menu appears.
4. Select the reference
waveform, Ref A or Ref B,
and press it. The waveform
appears on the display and
the period and amplitude of
the waveform appears in the
menu.
5. To clear the waveform from
the display, press RefA/B
again.
Recalling panel settings
Procedure 1. (For recalling from an
external SD card) Insert the
card into the slot.
2. Press the Save/Recall key. Save/Recall