GW Instek GDS-1000A Series User Manual - Manual (Page 15)

GETTING STARTED
15
Utility key Utility Configures the Hardcopy function
(page101), shows the system status
(page88), selects the menu
language (page92), runs the self
calibration (page120), configures
the probe compensation signal
(page121), and selects the USB
host type(page89).
Help key Help Shows the Help contents on the
display (page42).
Autoset key Autoset Automatically configures the
horizontal, vertical, and trigger
settings according to the input
signal (page44).
Measure key
Measure Configures and runs automatic
measurements (page50).
Save/Recall key
Save/Recall Saves and recalls images,
waveforms, or panel settings
(page94).
Hardcopy key
Hardcopy Stores images, waveforms, or
panel settings to an SD card
(page101), or prints screen images
to a PictBridge compatible printer
(page117).
Run/Stop key
Run/Stop Runs or stops triggering (page45).
Trigger level knob
LEVE L
TRIGGER Sets the trigger level (page81).
Trigger menu key MENU Configures the trigger settings
(page81).
Single trigger key SINGLE Selects the single triggering mode
(page88).