GW Instek GDS-1000A Series User Manual - Manual (Page 70)

GDS-1000A Series User Manual
70
Horizontal View
The Horizontal view section describes how to configure the
horizontal scale, position, waveform update mode, window zoom,
and X-Y mode.
Moving the waveform position horizontally
Procedure The horizontal position knob
moves the waveform left or
right. The position indicator at
the top of the display shows the
center and current position.
Center position Moving right
Selecting the horizontal scale
Select horizontal
scale To select the timebase (scale),
turn the TIME/DIV knob; left
(slow) or right (fast). TIME/DIV
Range 1ns/Div ~ 50s/Div, 1-2.5-5-10 increment
The timebase indicator at the bottom of the display
updates the current horizontal scale.