GW Instek GDS-1000A Series User Manual - Manual (Page 87)

CONFIGURATION
87
4. Press Mode repeatedly to
select the trigger mode,
Auto or Normal. To select
the Single trigger mode,
press the Single key.
SINGLE
Range Auto, Normal
5. Press When repeatedly to
select the pulse condition.
Then use the Variable knob
to set the pulse width.
VARIABLE
Condition > , < , = , ≠
Width 20ns ~ 10s
6. Press Slope/Coupling to set
trigger slope and coupling.
7. Press Slope repeatedly to
select the trigger slope,
which also appears at the
bottom of the display.
Range Rising edge, falling edge
8. Press Coupling repeatedly to
select the trigger coupling.
Range DC, AC
9. Press Rejection to select the
frequency rejection mode.
Range LF, HF, Off