GW Instek GDS-1000A Series User Manual - Manual (Page 106)

GDS-1000A Series User Manual
106
SD Normal Save to the SD card with a 4k
waveform memory length.
SD 1M Save to the SD card with a 1M
waveform memory length. For 2
channel operation only.
SD 2M Save to the SD card with a 2M
waveform memory length. For
single channel operation only.
Ref Internal reference waveform, A/B
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or the SD card is
disconnected before completion.
It takes approximately 1 min to save
a 2M waveform to the SD card in
fast mode. Detailed mode may take
over 10 times longer depending on
the speed of the SD card.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page98.
Saving the display image
Background
Saving the display image can be used as a screen
capture or it can be used as a reference waveform.
Procedure 1. (For saving to an external
SD card) Insert the card into
the slot.