Yokogawa Button Operated DX2000 - Manual (Page 76)

3-15
IM 04L41B01-62EN
1
2
3
4
5
Index
Detailed Information for
Attributes of Screens and Components
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
Height DX1000: 2 to 216(240)
DX2000: 2 to 440(480)
( ) = Status area set to No
display
This is the component height.
Height = 2 for height < 2
Y = (Min. Y
*2 + Max. height *3 – Height) for height < Max. height *3 and (Y
+ Height) > (Min. Y *2 + Max. height *3 )
Height = Max. height *3 , Y = Min. Y *2 for height ≥ Max. height *3
Direction [Horizon], [Vertical] This is the bar graph display direction.
The initial setting depends on the aspect ratio when the bar graph
size has been decided.
Height at the time of height ≥ Width
Width at the time of height < Width
In case of a Horizontal Bar Graph, Tag No./Channel No., Tag, Unit,
Digital value, and Alarm indicator are not displayed.
Channel font [Font5], [Font6], [Font8],
[Font12], [Font16]
This is the font for display of the component tag No./channel No.
Setting is not possible when “Direction” is [Horizontal].
The initial setting is [Font6] for DX1000 and [Font8] for DX2000.
Tag font [Font5], [Font6], [Font8],
[Font12], [Font16]
This is the font for display of component tags.
Setting is not possible when “Direction” is [Horizontal].
The initial setting is [Font6] for DX1000 and [Font8] for DX2000.
Digital display [Off], [On] This selects display/no display of component digital values.
Setting is not possible when “Direction” is [Horizontal].
Digital font [Font5], [Font6], [Font8],
[Font12], [Font16], [Font32]
This is the font for display of component digital values.
Setting is not possible when “Direction” is [Horizontal] or when “Digital
value display” is [Off].
The initial setting is [Font6] for DX1000 and [Font8] for DX2000.
Unit display [Off], [On] Display/No display is selected for the component unit.
Setting is not possible when “Direction” is [Horizontal].
Unit font [Font5], [Font6], [Font8],
[Font12], [Font16]
This is the font for display of component units.
Setting is not possible when “Direction” is [Horizontal] or when Unit
display is [Off].
Span display [Off], [On] This selects display/no display of the component span.
Span font [Font5], [Font6], [Font8],
[Font12], [Font16]
This is the font for display of component span values.
Setting is not possible when “Span display” is [Off].
Bar color [Green], [CHANNEL] This is the color of the bar graph.
Green: Display is made in the color set for each alarm level when an
alarm has occurred (red, orange, yellow, pink).
CHANNEL: The color set for the channel
Base position [SET], [Normal], [Center],
[Lower], [Upper]
This is the bar graph display origin.
SET: Setting of the DX recorder
Alarm display [Off], [On] This selects display/no display for the alarm indicator.
Setting is not possible when “Direction” is [Horizontal].
Alarm mark display [Off], [On] This selects display/no display of alarm marks.
2 Line display [Off], [On] This selects tag display with division into two lines (On) or not (Off).
*1 DX1000 max. width = 320, DX2000 max. width = 640
*2 DX1000 min. Y = 24(0), DX2000 min. Y = 40(0), ( ) = Status area set to No display
*3 DX1000 max. height = 216(240), DX2000 max. height = 440(80), ( ) = Status area set to No display
Synchronize action
►Section 3.3
3.7 Attributes of Bar Graph Components