Yokogawa Button Operated DX2000 - Manual (Page 29)

2-16
IM 04L41B01-62EN
Save a file
Procedure
Saving a file by specifying a folder
1. Select File > Save as from the menu bar.
The Browse for Folder dialog box appears.
2. Specify a folder or click the [New folder] button to create a folder.
If the [New folder] button has been clicked, enter a name for the new folder.
Note
• Network folders or compressed folders cannot be specified at the time of saving a display
data.
• Newly created display data must be saved. Bitmap files assigned for components need to
be saved in the same folder that the display data will be saved.
• The display data or bitmap file must be saved every time they have been received from DX
recorder.
3. Click [OK].
The data are saved.
Saving a file by overwriting
Select File > Save from the menu bar or click the Save icon.
In an already existing folder, the data will be saved by overwriting. If a new folder is
specified, the new folder becomes the target folder for saving files.
Explanation
When the file save folder is specified, the entire information of the Display list area is
saved. The file name at the time of saving is as shown below.
Display names in the Display list area at the initial setting * The file name when
the file was saved
Display1 INTERNAL1.cdc
Display2 INTERNAL2.cdc
Display3 INTERNAL3.cdc
-4- (Display4: when adding a new data, “Copy”+ display name: of the copy source) EXTERNAL1.cdc
-5- (Display5: when adding a new data, “Copy”+ display name: of the copy source) EXTERNAL2.cdc
• • • • • •
-27- (Display27: when adding a new data, “Copy”+ display name: of the copy source) EXTERNAL24.cdc
-28- (Display28: when adding a new data, “Copy”+ display name: of the copy source) EXTERNAL25.cdc
* The display name can be changed on the attribute of the display (►Section 3.1). When a
new display data is added (►Section 2.6) or copied from an existing display data (►Section
2.10), the display data file is saved to the list item number 4 or later.
If the file name is changed to file name other than shown above, the display data cannot
be sent to the DX recorder.
2.5 Open/Save a File