Yokogawa Button Operated DX2000 - Manual (Page 52)

2-39
IM 04L41B01-62EN
1
2
3
4
5
Index
Creating a Monitor Screen with DAQStudio
Screen Cut and Paste
1. Select a Display name from the Display list.
2. Select Edit > Cut from the menu bar or click the Cut icon.
The display data are moved to the clipboard.
An item No. is displayed for the display name at the movement source.
3. Select Edit > Paste from the menu bar or click the Paste icon.
The following message is displayed.
4. Click [OK].
The display data is pasted.
The display name becomes “Copy” + “Display name of the copy source.”
Note
Display names from the top through the third in the display list area cannot be cut.
Deleting a component/screen
1. Select the component or display name to be deleted.
2. Select Edit > Delete from the menu bar.
The component is deleted.
When display data are deleted, the following message is displayed.
3. Click [OK].
The display data are deleted.
Note
Display names from the top through the third in the display list area cannot be deleted.
Adding a screen
1. Select the position (item No.) in the Display list where a screen is to be added.
2. Select Edit > Add Display from the menu bar or click the Add Display icon.
The display name of “Display” + “Item No.” is displayed in the display list. The data are
blank.
Copied or cut display data can be pasted.
2.10 Editing Components and the Screen