Yokogawa Button Operated DX2000 - Manual (Page 122)

3-61
IM 04L41B01-62EN
1
2
3
4
5
Index
Detailed Information for
Attributes of Screens and Components
List of Settings
Refer to Section 3.3 for attributes without explanations in the list of settings.
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
X DX1000: 0 to 318
DX2000: 0 to 638 This is the X-coordinate of the left side of the component.
X = 0 for X < 0
X = (Max.
width *1 – Width) for (X + Width) > Max. width *1
Y DX1000: 24(0) to 238
DX2000: 40(0) to 478
( ) = Status area set to No
display
This is the Y-coordinate of the upper side of the component.
Y = Min. Y
*2 for Y < Min. Y *2
Y = (Min. Y *2 + Max. height *3 – Height) for (Y + Height) > (Min. Y *2 +
Max. height *3 )
Width DX1000: 2 to 320
DX2000: 2 to 640 This is the component width.
Width = 2 for width < 2
X = (Max. width*
1 – Width) for width < Max. width *1 and (X + Width) >
Max. width *1
Width = Max. width *1 , X = 0 for width ≥ Max. width *1
Height DX1000: 2 to 216(240)
DX2000: 2 to 440(480)
( ) = Status area set to No
display
This is the component height.
Height = 2 for height < 2
Y = (Max. height*
3 – Height) for height < Max. height *3 and (Y +
Height) > Max. height *3
Height = Max. height *3 , Y = 0 for height ≥ Max. height *3
Batch group number Setting range: 1 to multi-
batch number set by the
basic settings of the DX
recorder
DX1000: [1] to [6]
DX2000 standard memory:
[1] to [6]
DX2000 expanded memory:
[1] to [12]
This is the batch group number which can be selected within the
range of the multi-batch number set by the basic settings of the DX
recorder.
This item cannot be set when multi-batch of the DX recorder is OFF.
Display Grp no when multi-batch is Off.
DX1000: [1] to [10]
DX2000: [1] to [36]
when multi-batch is On.
DX1000: [1] to [6]
DX2000: [1] to [12] This is the batch group number that can be selected within the range
of the number of multibatches set in the basic settings on the DX
recorder.
The group selection range differs according to the batch.
Kind [Off], [On], [Bmp] This is the scale plate kind.
Off: A simple scale plate without scale values
On: Display with the scale plate display divided into the set number of
divisions and drawing of scale values at fixed intervals.
Bitmap: A bitmap designed by the user is used for the scale plate.
Bitmap filename Input is possible for max. 51
single-byte alphanumeric
characters.
This specifies the file name of the bitmap to be displayed.
This is effective when “Kind” is [Bmp]. This is the name of the bitmap
file to be pasted onto the scale plate.
The bitmap file read destination is the folder that the latest display
data (.CDC) has saved.
Form [Small], [Large] Scale band format. When the format is [Small] and the channel’s
green band setting is [Off] in the settings file, the area for the scale
value and units is filled with the background color of the scale band.
If there is no settings file, the channel’s green band setting is Off.
Small: A small scale plate
The same image as for 4-screen display with DX2000 or the
scale plate with DX1000.
Large: A large scale plate
This is the same image as for the scale plate at the time of
other than 4-screen display with DX2000.
*1 DX1000 max. width = 320, DX2000 max. width = 640
*2 DX1000 min. Y = 24(0), DX2000 min. Y = 40(0), ( ) = Status area set to No display
*3 DX1000 max. height = 216(240), DX2000 max. height = 440(80), ( ) = Status area set to No display
3.29 Attributes of Scale Components