Yokogawa Button Operated DX2000 - Manual (Page 18)

2-5
IM 04L41B01-62EN
1
2
3
4
5
Index
Creating a Monitor Screen with DAQStudio
Display list area
List of display names displayed at the time of start
Displays display names from No. 4 to No. 28
When a display name is clicked, the display
of the Screen construction area changes.
When a display name in the list is clicked or the up and down arrow keys (↑, ↓) of
the keyboard are pressed to select a screen, the screen is displayed in the screen
construction area.
When a display name is selected, display editing (Copy, Cut, Paste, Delete) can be done
in the display list area.
When a location outside the Display list area is selected, editing of the Screen
construction area becomes possible.
Refer to Section 2.10 for the operation procedure.
The initial setting at the time of start is for display of blank data for the display names
Display1 to Display3.
Work area
The work area contains the tabs below. When screen data is received from the DX
recorder, the lists that are displayed vary depending on the information in the settings
file.
• Channel/Alarm list
Channels or alarms can be assigned to components for channel assignment.
List area spreader
The alarm information is displayed when clicked.
Channel No., Tag No. or Tag comment
Alarm information
The alarm information is hidden when clicked.
Status without Alarm setting (Gray)
Status with Alarm setting (Green)
The Channel/Alarm information set at the DX recorder is displayed as Channel No., Tag
No. or Tag Comment. At this time, the alarm information is included.
Switching of the display format can be selected from the View menu.
When the mouse pointer is placed onto the list area spreader, the mouse pointer
changes to an arrow shape. By dragging, the View area can be increased or decreased
vertically.
The initial settings for the Main screen at the creating a new screen are shown below.
In case of DX1000: Channels “CH001” to “CH012” and calculation channels “CH101” to
“CH124” are displayed.
In case of DX2000: Channels “CH001” to “CH048”, calculation channels “CH101”
to “CH160”, and expansion channels “CH201” to “CH440” are
displayed.
2.2 Explanation of the Main Screen of DAQStudio