Yokogawa Button Operated DX2000 - Manual (Page 129)

3-68
IM 04L41B01-62EN
3.32 Attributes of Circle Components
The following limitations exist for setting of attributes of circle components.
• [Visible] can only be set when [Depend ID] is set to [None].
List of Settings
Refer to Section 3.3 for attributes without explanations in the list of settings.
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
X DX1000: 0 to 318
DX2000: 0 to 638 This is the X-coordinate of the left side of the square enclosing the
component.
X = 0 for X < 0
X = (Max.
width *1 – size) for (X + size) > Max. width *1
Y DX1000: 24(0) to 238
DX2000: 40(0) to 478
( ) = Status area set to No
display
This is the Y-coordinate of the top of the square enclosing the
component.
Y = Min. Y
*2 for Y < Min. Y *2
Y = (Min. Y *2 + Max. height *3 – size) for (Y + size) > (Min. Y *2 + Max.
height *3 )
Size DX1000: 2 to 216(240)
DX2000: 2 to 440(480)
( ) = Status area set to No
display
This is the size of the square enclosing the component.
Size = 1 for Size < 1
X = (Max. height*
3 – Size) for height < Max. height *3 and (Y + Size) >
Max. height *3
Y = (Min. Y *2 + Max. height *3 – Size) for Size < Max. height *3 and (Y +
Size) > (Min. Y *2 + Max. height *3 )
Size = Max. height *3 , Y = Min. Y *2 for Size ≥ Max. height *3
Size = Max. height *3 , X = (Max. width *1 – Max. height *3 )
for Size ≥ Max. height *3 and (X + Max. height *3 ) > Max. width *1
*1 DX1000 max. width = 320, DX2000 max. width = 640
*2 DX1000 min. Y = 24(0), DX2000 min. Y = 40(0), ( ) = Status area set to No display
*3 DX1000 max. height = 216(240), DX2000 max. height = 440(80), ( ) = Status area set to No display