Yokogawa Button Operated DX2000 - Manual (Page 30)

2-17
IM 04L41B01-62EN
1
2
3
4
5
Index
Creating a Monitor Screen with DAQStudio
2.6 Adding a Display
Procedure
1. Click the Display name in the display list area.
Now the Add Display icon of the Tool bar can be selected.
2. Select Edit > Add Display from the menu bar or click Add Display icon.
The screen for DX1000 or DX2000 is displayed.
3. Specify DX recorder firmware version (►Section 2.4), and create the screen.
Note
The screens in the display list cannot be of different screen versions. If you switch the screen
that you have added (or another screen on the display list) to an earlier version, all the screens
on the display list will be switched to the earlier version. Any components that are not supported
by the earlier screen version will be deleted.