Yokogawa Button Operated DX2000 - Manual (Page 120)

3-59
IM 04L41B01-62EN
1
2
3
4
5
Index
Detailed Information for
Attributes of Screens and Components
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
Compress ratio [1], [2], [4], [5], [6], [7], [8] This selects the number of data represented by 1 dot.
Trend area [50], [60], [70], [80], [90], [100] The rate for the width of the waveform display is calculated with the
width in direction of the time axis as 100 %. This is used when “Trend
blank” of the DX recorder is ON.
Margin
(can only be set with
a Version 4.01 screen
and a Version 4.11
screen)
[Off], [On] Sets whether or not to display a margin on both sides in the direction
of the span.
Off: No margin
On: Margin of 3% of component width is added in the direction of the
span
Display group
switching
(can only be set with
a Version 4.01 screen
and a Version 4.11
screen)
[Off], [On] Sets whether or not to switch the group display in the DX recorder’s
execution panel when the left/right keys are pressed.
On: Switched
Off: Not switched
Time/div display [Off], [On] This selects display/no display of Time/div.
Time/div font [Font6], [Font8] This is the font for display of Time/div. Setting is not possible when
“Time/div display” is [Off].
The initial setting is [Font6] for DX1000 and [Font8] for DX2000.
Time grid display
(can only be set with
a Version 4.01 screen
and a Version 4.11
screen)
[Off], [On] Sets [On] or [Off] to indicate whether or not the time is displayed.
When set to [Off], the [Time display] and [Time font] items cannot be
set.
Time display [Off], [On] This selects display/no display of the grid time.
On: Display
Off: No display
Time interval (can
only be set with a
Version 4.01 screen
and a Version 4.11
screen)
[Alternate], [EveryGrid] Sets the interval for displaying the time.
EveryGrid: Displays in all time grids
Alternate: Displays in every other time grid
Time font [Font5], [Font6] This is the font for display of the grid time.
Setting is not possible when “Time display” is [Off].
Scale grid display
(can only be set with
a Version 4.01 screen
and a Version 4.11
screen)
[Off], [On] Sets whether or not to display the scale grid.
On: Displayed
Off: Not displayed
Message display [Off], [On] This selects display/no display of message marks.
On: Display
Off: No display
Message mark size [Small], [Large] This is the size for display of message marks.
Setting is not possible when “Message display” is [Off].
2nd span [Off], [On] This selects effective/disabled for 2nd span.
On: Effective
Off: Disabled
2nd span Lower
(On Version3
screens, no decimal
places allowed)
[0.0] to [90.0] The 2nd span lower limit is set between setting span lower limit (0.0 %)
and upper limit (100.0 %).
Setting is not possible when “2nd span” is [Off].
2nd span Upper
(On Version3
screens, no decimal
places allowed)
[10.0] to [100.0] The 2nd span lower limit is set between setting span lower limit (0.0 %)
and upper limit (100.0 %).
Setting is not possible when “2nd span” is [On].
Synchronize action
►Section 3.3
3.28 Attributes of Trend Components