Yokogawa Button Operated DX2000 - Manual (Page 32)

2-19
IM 04L41B01-62EN
1
2
3
4
5
Index
Creating a Monitor Screen with DAQStudio
Explanation
Notes on Creating Components
After creating components aligned to the grid, if placed adjacent to each other they
overlap by 1 dot even though they do not appear to overlap. Separate components from
each other by at least 1 dot.
Display When Components Overlap on the Execution Screen
Limitations (A, B, and C) apply when components overlap on the execution screen. If
components with the same overlap restriction are overlapping, components placed under
the front component (i.e., in the background) are not displayed.
Overlap
restriction
Component name (attribute conditions)
None Digital, bar, scale (kind: OFF), label, tag No., tag comment, simple digital, simple
bar graph, alarm mark, units, alarm indicator, span lower limit, span upper limit,
line, rectangle, circle, push button, switch, comment box, comment block, Comm
In, Group name, System icon, Memory bar, Time label, Batch group number,
Batch name, Modbus In
A Scale (kind: ON)
Alarm list
Message list
B Scale (kind: bitmap), bitmap
C Trend
For example, if two components with Overlap restriction A are overlapping on the builder
screen, only the front component is displayed on the custom display execution screen of
the DX recorder.
Front Back
2.7 Creating Components