Yokogawa Button Operated DX2000 - Manual (Page 66)

3-5
IM 04L41B01-62EN
1
2
3
4
5
Index
Detailed Information for
Attributes of Screens and Components
Explanation of common attributes
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
Depend ID [None], [Component ID] This is the ID of the component on which the component depends.
None: There are no components on which this component depends.
Component ID: This is the ID of the component on which the
component depends.
Visible [Off], [On] Change is not possible in case of dependence on other components.
Change is possible when Depend ID is [None].
Off: Not displayed on the execution screen of the DX recorder (always
displayed on the builder screen)
On: Displayed on the execution screen of the DX recorder
Channel DX1000: [CH001] to [CH012],
[CH101] to [CH124]
DX2000: [CH001] to [CH048],
[CH101] to [CH160],
[CH201] to [CH440]
Set the assigned channel No. Setting is possible when Group control is
[None].
Frame [None], [Black], [White],
[Raised], [Sunken]
This is the component frame kind.
None: No frame
Black: Black frame with a solid line with the width of 1 dot
White: White frame with a solid line with the width of 1 dot
Raised: Frame with a solid line with the width of 1 dot, appearing raised
Sunken: Frame with a solid line with the width of 1 dot, appearing
sunken
The following are the default settings by component.
[None]: Label, Simple digital, Tag No., TagComment, Unit, SpanL,
SpanU, Group Name, System icon, Time label, Batch group
no., Batch Name
[Black]: Comment box, Comment block
[Raised]: Digital, Bar, Alarm indicator, Switch, Alarm list, Message list
[Sunken]: Memory bar
Group control [None],
[GrpCtrl1], [GrpCtrl2],
[GrpCtrl3], [GrpCtrl4]
Indicates group control status.
None: No group control
GrpCtrl1 to 4: indicates group control for group control 1 to 4.
Gr. Ctrl order DX1000: [1] to [6]
DX2000: [1] to [10] Indicates the group control order.
Setting is not possible when Group control is [None].
Example of Depend ID
For example, if you have the following components whose IDs are 0 to 3 on the [Builder
screen], the IDs you will be able to configure are shown in the below table.
0 ID
Depend on 1 Depend on 2
1 2 3
ID
0
1
2
3 None
None
None
None 1
2
3
0
Configurable ID
2
3
1
3
2
Example of Frames
None Black White Raised Sunken
3.3 Common Attributes of Components