Yokogawa Button Operated DX2000 - Manual (Page 74)

3-13
IM 04L41B01-62EN
1
2
3
4
5
Index
Detailed Information for
Attributes of Screens and Components
Alarm mark tab
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
Use Checked, Not checked Checked: Alarm marks are used.
Not checked: Alarm marks are not used.
Alarm level [1], [2], [3], [4] 1 to 4: Alarm level
Style [Alarm], [Fixed] This is the alarm mark status.
Alarm: Trapezoid
Fixed: Triangle
Position In case of a Vertical Bar
Graph
[Left], [Right]
In case of a Horizontal Bar
Graph
[Over], [Under]
This set alarm mark setting at top, bottom, left or right of a bar graph.
The choices change depending on the bar graph display direction.
In case of a Vertical Bar Graph
Left: Display on the left side of the bar graph
Right: Display on the right side of the graph bar
In case of a Horizontal Bar Graph
Over: Display above the bar graph
Under: Display below the bar graph
Mark size [Large], [Small] This is the alarm mark size.
Large: Large mark
Small: Small mark
color [Red], [Green], [Blue],
[B.violet], [Brown], [Orange],
[Y.green], [Light blue], [Violet],
[Gray], [Lime], [Cyan], [Dark
blue], [Yellow], [Light gray],
[Purple], [Pink], [L.brown],
[L.green], [Dark gray], [Olive],
[Dark cyan], [S.green],
[Black], [White], [CHANNEL]
This is the mark display color.
CHANNEL: The color set to the specified channel
Color change [Off], [On] Off: The color does not change at the time of alarm occurrence.
On: The color of the alarm mark changes when an alarm occurs.
Alarm color Same choice as for “Color”,
[ALARM]
This is the mark display color at the time of alarm occurrence.
Setting is not possible when “Color change” is [Off].
Alarm color: This is the alarm display color set for each alarm level.
Synchronize action
►Section 3.3
3.6 Attributes of Simple Bar Graph Components