Yokogawa Button Operated DX2000 - Manual (Page 75)

3-14
IM 04L41B01-62EN
3.7 Attributes of Bar Graph Components
The following limitations exist for setting of attributes of bar graph components.
• [Visible] can only be set when [Depend ID] is set to [None].
• Setting of Channel font, Tag font, Digital display, Digital font, Unit display, Unit font,
and Alarm display is not possible when Style is [Horizontal].
• Setting of Digital font is not possible when Digital value display is [Off].
• Setting of Unit font is not possible when Unit display is [Off].
• Setting of Span font is not possible when Span display is [Off].
List of Settings
Refer to Section 3.3 for attributes without explanations in the list of settings.
Attribute Set value/choice
(Underlined items are initial
set values)
Description, conditions
X DX1000: 0 to 318
DX2000: 0 to 638 This is the X-coordinate of the left side of the component.
X = 0 for X < 0
X = (Max.
width *1 – Width) for (X + Width) > Max. width *1
Y DX1000: 24(0) to 238
DX2000: 40(0) to 478
( ) = Status area set to No
display
This is the Y-coordinate of the upper side of the component.
Y = Min. Y
*2 for Y < Min. Y *2
Y = (Min. Y *2 + Max. height *3 – Height) for (Y + Height) > (Min. Y *2 +
Max. height *3 )
Width DX1000: 2 to 320
DX2000: 2 to 640 This is the component width.
Width = 2 for width < 2
X = (Max. width
*1 – Width) for width < Max. width *1 and (X + Width) >
Max. width *1
Width = Max. width *1 , X = 0 for width ≥ Max. width *1
*1 DX1000 max. width = 320, DX2000 max. width = 640
*2 DX1000 min. Y = 24(0), DX2000 min. Y = 40(0), ( ) = Status area set to No display
*3 DX1000 max. height = 216(240), DX2000 max. height = 440(80), ( ) = Status area set to No display