Yokogawa Button Operated DX2000 - Manual (Page 51)

2-38
IM 04L41B01-62EN
Copy/Cut/Paste/Delete/Add for components and screens
After components or display data have been created, Copy, Cut, Paste, Delete, and Add
can be performed for efficient creation of monitor screens.
Procedure
Component Copy and Paste
1. Click the Edit icon of the Components bar and click the component to be copied.
2. Select Edit > Copy from the menu bar or click the Copy icon.
The component is copied to the clipboard.
3. Select Edit > Paste from the menu bar or click the Paste icon.
The component is pasted to a location moved by (10, 10) from the coordinates of the copied
component. With the second paste operation, the component is pasted to a location moved
by (10, 10) from the previously copied component.
When coordinates are specified where a part of the components no longer is displayed
on the screen construction area, the component is arranged so as to fit into the screen
construction area.
Paste
Copy with movement by (10, 10).
Copy to fit into the screen
construction area.
Screen Copy and Paste
1. Click the display name to be copied in the display list area.
2. Select Edit > Copy from the menu bar or click the Copy icon.
The screen is copied to the clipboard.
3. Click any location (copy destination) on the Display list area.
4. Select “Paste” from the Edit menu or click the Paste icon.
The display data are copied. The file name becomes “Copy” + “Display name of the copy
source.”
Select the copy source. Specify the copy destination. Paste.
Display name with
copying of Display2
Component Cut and Paste
1. Select one or several components.
2. Select Edit > Cut from the menu bar or click the Cut icon.
The component is moved to the clipboard.
3. Select Edit > Paste from the menu bar or click the Paste icon.
The component is pasted into its original position.
2.10 Editing Components and the Screen