Yokogawa Button Operated DX2000 - Manual (Page 138)

5.1 List of Messages
Messages may be displayed on the screen during use.
Error message
Code Message Handling Methods/Explanation Refer to
E0004 Invalid License number. Please enter a correct license number. —
E0250 Failed to start Adobe Reader. Adobe Reader 7.0 or later is required to view the user’s
manual.
Check whether Adobe Reader is installed.
—
E8001 Connection error, please check
communication setting!
Please use System environment to confirm that the
communication settings (IP address/host name, user name,
password) with the connection object equipment are correct.
Section 4.1,
Section 4.2
E8002 The connected device is not
supported!
The following causes can be assumed. Please confirm the
connected equipment.
• The equipment is not DX1000/DX1000N/DX2000.
• The release number of DX1000/DX1000N/DX2000 is not
R3 or higher.
Section 4.1,
Section 4.2
E8003 Receive failed! The following causes can be assumed. Please check.
• Communication with the DX is not normal.
• The DX’s FTP server function is On.
• A CF card is inserted into the DX recorder. Also make sure
that the CF card has free space.
• If Multilogin is On, communication will always result
in an error when users logged on via key login have
communication connections open and have moved to a
mode other than Operate mode.
—
E8004 Send failed! The following causes can be assumed. Please check.
• Communication with the DX is not normal.
• The DX’s FTP server function is On.
• A CF card is inserted into the DX recorder. Also make sure
that the CF card has free space.
• If Multilogin is On, communication will always result
in an error when users logged on via key login have
communication connections open and have moved to a
mode other than Operate mode.
• If the version of the connected DX recorder is earlier than
4.11 and the recorder is a model with the /AS1 option,
memory start is in progress.
• The same user is logged in to the main unit. (If Multilogin is
OFF, an error occurs if another user is logged in.)
• Settings are being entered on the main unit.
—
E8005 Failed to save graphic file! The following causes can be assumed. Please check.
• The save object disk is broken.
• No permission has been given for file and folder writing/
reading.
• The empty capacity of the disk is not sufficient.
—
E8006 Failed to read graph file! The following causes can be assumed.
• The object data are being used for another program.
• The present user does not have the authority to access the
file. Confirm the file attributes.
• The file is broken. Confirm the file attributes.
—
E8007 Invalid folder name! The entered folder name is not correct. Enter a correct folder
name.
Section 2.12
E8008 Failed to send! The machine’s
hardware is different.
Check if a DX1000 screen construction file has been sent to
DX2000 or vice versa.
Section 4.1
Continued on the next page
Chapter 5 Messages and Handling Methods
5-1
IM 04L41B01-62EN
Messages and Handling Methods
1
2
3
4
5
Index