Yokogawa RotaMASS 3-Series - Manual (Page 13)

1. INTrOdUCTION
1-5
IM 01R04B04-00E-E 8th edition March 01, 2011 -00 All Rights Reserved. Copyright © 2003, Rota Yokogawa
1.5 disposal, Cleaning
and return
For safe use
WARNING
If the process fluid is harmful to personnel, handle
the instrument carefully even after it has been
removed from the process line for maintenance or
other purposes. Exercise extreme care to prevent
the fluid from coming into contact with human skin
and to avoid inhaling any residual gas. Before
sending it to the Seller for examination and/or
repair please clean the instrument thoroughly and
make sure, that no harmful chemicals are in or
at the meter. If the instrument contains unknown
fluids the Seller will send it back to the Purchaser
for cleaning on their cost.
WARNING
ROTAMASS might be heavy instruments. Please
give attention to prevent that persons are not
injured by carrying or installing. It is preferable
when carrying the instrument to use a cart and
be done by two or more persons. When removing
the instrument from hazardous processes, avoid
contact with the fluid and the interior of the meter.
the failure occurred. It will be helpful if schematic
diagrams and/or records of data are attached to
the failed instrument. Whether or not the failed
instrument should be repaired free of charge shall
be left solely to the discretion of the Seller as a
result of an inspection by the Seller.
The Purchaser shall not be entitled to receive re-
pair services from the Seller free of charge, even
during the warranty period, if the malfunction or
damage is due to improper and/or inadequate
maintenance of the instrument in question by the
Purchaser handling, use or storage of the instru-
ment in question beyond the design and/or speci-
fications requirements, use of the instrument in
question in a location no conforming to the condi-
tions specified in the Seller’s General Specification
or Instruction Manual retrofitting and/or repair by
an other party than the Seller or a party to whom
the Seller has entrusted repair services. improper
relocation of the instrument in question after
delivery reason of force measure such as fires,
earthquakes, storms/ floods, thunder/lightning, or
other reasons not attributable to the instrument in
question.
For disposal and recycling please refer to your na-
tional regulations.
Please find following help. After remove of all
products rests the instruments can be disassem-
bled and the parts treated different.
Naming: R = recycling, D = disposal,
Sd = special disposal
Name
of
product
Body Converter
housing
Cover with
window
Elec-
tron-
ics
Rota-
mass SS R Al R Al +
Glass
D Sd
In case of return of flow meters to Yokogawa for
testing or repair purposes please fill out one of the
following forms and send it with the equipment to
YOKOGAWA.
Warranty
The warranty of the instruments shall cover the
period noted on the quotation presented to the
purchaser at the time of purchase. The Seller shall
repair the instrument free of charge when the fail-
ure occurred during the warranty period.
All inquiries on instrument failure should be direct-
ed to the Seller’s sales representative from whom
you purchased the instrument or your nearest
sales office of the Seller.
Should the instrument fail, contact the Seller,
specifying the model and instrument number of the
product in question. Be specific in describing
details on the failure and the process in which