Yokogawa EJX930A - Manual (Page 33)

<4. Preparation> 4-4
IM 01C25R51-01E
4.2.4 FieldMate and Device Files Installation
Install following software before installing FlowNavigator.
Step 1 Install software for communication device (For F OUNDATION fieldbus
communication)
Refer to Appendix D-1 for detail.
Step 2 Install FieldMate
NOTE
Device Files which includes Yokogawa DTMLibrary HART/F
OUNDATION
fieldbus and software for
HART communication device are automatically installed during the installation of FieldMate.
Regarding installation of software for HART communication device, refer to Appendix C-1.
NOTE
For the installation procedures of FieldMate, refer to the User’s Manual IM01R01A04-01E
“FieldMate Versatile Device Management Wizard Getting Started”.
When installing FieldMate, log-in the Windows as an Administrator or an user with an
administrative authority.
4.2.5 FlowNavigator Installation
Following gives the overview of FlowNavigator Setup and recommended installation procedures.
Overview of FlowNavigator Setup
The FlowNavigator setup is used for installing FlowNavigator (F
OUNDATION fieldbus Program,
HART Program and Resource) and located in “FlowNavigator CD-ROM”.
Following shows “FlowNavigator Setup window”.
F0401E.ai
Install FlowNavigator for both HART and
F
OUNDATION fieldbus
[FlowNavigator]
Install FlowNavigator for HART
[FlowNavigator HART]
Install FlowNavigator for F OUNDATION
fieldbus
[FlowNavigator F
OUNDATION fieldbus]
Figure 4.1 FlowNavigator Setup window