Yokogawa EJX930A - Manual (Page 141)

<9. File Format> 9-1
IM 01C25R51-01E
9. File Format
9.1 Configuration File
(1) FlowNavigator file
Table 9.1 Configuration File Information
Category
File
Name
Location
Flow Configuration Wizard
Description
Import Menu Export Menu
Flow
Parameter
File
*.xmv Desk Top (short cut)
\ [UserName]
\ Documents (Default)
  This file consist of following
parameter:
- User Flow Parameters
- Device Flow Parameters
EJXMVTool driven on the
different frame application can
access the file.
Compatible between
both protocol, HART and
F
OUNDATION fieldbus.
*.vmv   This file consist of following
parameter:
- User Flow Parameters
- Device Flow Parameters
DYFMVTool driven on the
different frame application can
access the file.
HART
General
Parameters
File
*.prm Desk Top (short cut)
\ [UserName]
\ Documents (Default)
 — HART Device General
Parameters
(only for FSA210 user)
(2) Frame Application project file (.dns/dfs file for FieldMate)
In the project file, project information specific to each frame application is saved in addition to the
Device DTM and FlowNavigator parameters shown in below. Only that frame application can use
the file.
• User Flow Parameters
• Device Flow Parameters
• Device General Parameters
For detail, refer to the section 3.4.1, 4.6.4 and 6.1.2.