Caution – Yokogawa EJX930A User Manual
Page 116
<7. Operation of EJXMVTool>
7-23
IM 01C25R51-01E
CAUTION
While executing Obtain Flow Coefficient on the F
OUNDATION
fieldbus DTM, do not write the
parameters of the EJX Multivariable Transmitter from other parameter setting tools.
NOTE
• This menu is active only when the transmitter is connected.
• In Basic mode density output data is always 0.
NOTE
If one of following alarm occurs, all the output data is held to the value before alarm occurs.
AL. 01(CAP.ERR)
AL. 02(AMP.ERR)
AL. 03(ET.ERR)
For detail alarm information, refer to User’s Manual IM 01C25R03-01E “EJX910A and EJX930A
Fieldbus Comminication Type”.
EJXMVTool Help
Click the [Help] → [EJXMVTool Help]
The EJXMVTool online manual opened when this menu is clicked.
EJXMVTool About
Click the [Help] → [EJXMVTool About]
The EJXMVTool version number is shown when this menu is clicked.