IAI America RCS2W - Manual (Page 96)

4. Maintenance Inspection
88
5) Align the tab on the replacement motor unit with the countermark on the cylinder.
With the motor unit and cylinder aligned properly, insert the coupling into the replacement motor unit by
aligning the orientation of this coupling with that of the actuator coupling (adjusted to a position corresponding
to a rod projection of 2 mm from the mechanical end). Apply countermarks to identify the current motor
position (phase Z position) and coupling.
Position the couplings.
Align the tab on the
replacement motor unit
with the countermark on
the cylinder.
Coupling
Replacement
motor unit
After the coupling has been
inserted, apply countermarks on
the replacement motor unit and
coupling.