IAI America RCS2W - Manual (Page 51)

1. Specifications Check
43
1.3.13 Difference in Connector Cable Orientation (Model: A1 to A3)
The direction of cable ejection is different.
1.3.14 Motor Reversing Type (Standard) (Model: ML), Motor Reversing Type (Model: MR)
The direction of motor reversing is different. From the view of the motor side, the type with the motor reversed to
the left is ML, and the motor reversed to the right is MR
1.3.15 Difference in Guide Attachment Orientation (Model: GS2 to GS4)
The position of the rod for the single guided type is different. They are attached on the right (GS2), attached on
the bottom (GS3) and attached on the left (GS4).
1.3.16 Rod Tip Extended Type (Model: RE)
This is an adopter to extend the rod tip of RCS2-SRA7BD to have the same distance from the attachment hole to
the rod tip for RCS2-SRA4BD and RCS2-RA7BD.
1.3.17 CE Mark Complied (Model: CE)
It shows the compliance with CE Mark
Ejection on motor side (Standard)
■ No option indicated (Not Specified) Left oriented ejection
■ Option indication:
A1
(Complied with SRA7BD)
Right oriented ejection
■ Option indication:
A3
(Complied with SRA7BD)
Ejection on rod side
■ Option indication:
A2
(Complied with RA5C/RA5R/SRA7BD)