IAI America RCS2W User Manual
Page 55

2. Installation
47
[2] Handling in Assembled Condition
x
When carrying the actuator, exercise caution not to bump it against nearby objects or structures.
x
Secure the rods to prevent sudden movement during transport.
x
If any end of the actuator is overhanging, secure it properly to avoid significant movement due to external
vibration.
x
When transporting the assembly without the ends of the actuators fastened, do not subject the assembly to an
impact of 0.3 G or more.
x
When suspending the mechanical equipment (system) with ropes, avoid applying force to actuator, connector
box, etc. Also, avoid the cables being pinched or caused an excessive deformation.
This manual is related to the following products: