4 grease supply – IAI America RCS2W User Manual
Page 77

4. Maintenance Inspection
69
4.4
Grease Supply
4.4.1
Grease to be applied on Rod Sliding Surface
IAI uses the following grease in our plant.
Kyodo Yushi
Multitemp LRL 3
Warning: Never use any fluorine-based grease. Mixing lithium-based grease with other grease not only
reduces the performance of the grease, it may even cause damage to the actuator.
4.4.2
Grease Applied on Ball Screw and Rod Sliding Surface
[Applicable Units: RCS2-RA5C, RA5R, RGS5C, RGD5C,SR7BD, SRGS7BD, SRGD7BD]䎃
IAI uses the following grease in our plant.
Kyodo Yushi
Multitemp LRL 3
This product is suitable for ball screws and has excellent properties such as low heat generation. Use a lithium
grease spray for maintenance. Keep the spraying time to within 1 second per spray action.
Wako Chemical
Grease spray No.A161 or equivalent
Warning: x Never use any fluorine-based grease. It will cause a chemical reaction when mixed with a
lithium-based grease and may cause damage to the actuator.
x
Keep the spraying time to within 1 second, and do not spray continuously for more than 1
second or spray more than twice repeatedly. It may create problems.