IAI America RCS2W - Manual (Page 50)

1. Specifications Check
42
1.3.10 Trunnion Bracket (Rear) (Model: TRR)
This is a bracket to make the cylinder follow when the movement of an object attached on the tip of the rod is
different from the direction of rod movement. Attach it on the back (motor) side.
1.3.11 Clevis Bracket (Model: QR)
This is a bracket to make the cylinder follow when the movement of an object attached on the tip of the rod is
different from the direction of rod movement.
1.3.12 Rear Attachment Plate (Model: RP)
This is a metal (plate) to affix the motor reversing type on the back side.
For RCS2-RA4□
Model code of single product:
RCA-TRR-RA4
3
ME
ME
9
56 st
SE
9.5 107
77
40
20
22
10
10
40
87
66.5
Nut A Nut C
φ37
Home
M10×1.25
(Effective Thread
Area = 20)
φ20 Rod O.D.
M30×1.5
(Effective Thread
Area = 17.5)
47 (Width across Flats)
36 ( Width across Flats)
19 (Width across Flats)
22
20
L
r
15
55
75
115.5
9.5
3 3
9 10
56
82.5
33
26
28
16
M4
50.5
26.4
48 98.5
ME
ME
st
SE
40
φ4
2
φ5
0
50
100
150
200
250
300
125
175
225
275
325
375 242
292
342
392
442
492
st L
2-φ9
RCS2-RA4R
Model code of single product: RCA-QR-RA4
Home
Nut B
Nut A
φ37
14
(Width across Flats)
φ20 Rod O.D.
Clevis
32
(Width across Flats)
For RCS2-RA4R
Model code of single product: RCA-RP-RA4
9.5
82.5
115.5
26
3
9 10
56
st
φ 30h9 (-0.052)
0
SE ME ME
33 2.5 50.5
L
4-M4
48
98.5
φ39
φ37
Nut B
Home
Nut A φ42 φ50
32 (Width across Flats)
14 (Width across Flats)
φ20 Rod O.D.