Clear-Com Tempest2400 - Manual (Page 86)

80 Tempest®24 00 2 -Channel Wireless Intercom System
System Features
• All digital, frequency hopping spread spectrum technology - no frequency coordinati on needed
• 2.4G Hz off ers World-Wide operati on with no licensing requirements in most world-wide locati ons
• 2xTX™ transmission voice data redundancy technology
• Accu Sync™ ti ming system for improved performance with multi ple BaseStati ons
• ZSync Technology for improved performance with multi ple BaseStati ons covering multi ple coverage zones
• iSelect™ On-Command roaming
• Seamless Roaming allows users to move freely from one coverage zone to another
• Two intercom channels and up to 5 full duplex BeltStati ons per BaseStati on in Normal Mode
• Confi gure up to 10, 2.4G HZ BaseStati ons with 25 full duplex BeltStati ons in a single system when operati ng in
Normal Mode
• An unlimited number of BeltStati ons per BaseStati on in Shared and Split Mode
• BeltStati ons can access both intercom channels in “Dual-listen” or “Single-listen” mode
• Weather resistant BeltStati ons
• BeltStati ons can send and receive “Call Alert” signal from wired intercom systems
• Silent vibrate mode on BeltStati ons
• Both “Stage Announce” and GPO Relay functi on available for each BeltStati on
• Talk switches can be de-latched via the Mic Kill feature from either the BaseStati on or the hardwire intercom
• Auxiliary audio input and output
• Program Volume control allows user to set volume of incoming program audio
• LAN control interface
• Electret or Dynamic Mic auto select
• Multi ple antenna connecti on opti ons
• Compati ble with Clear-Com®, RTS®, Telex®, and other 2-Wire and 4-Wire intercom systems