Iselect roaming – selecti ng a basestati on, Set mic gain – Clear-Com Tempest2400 User Manual
Page 53
47
Tempest®24 00 2 -Channel Wireless Intercom System
Set Mic Gain
Set the Mic Gain properly to ensure the best audio quality. To set the Mic Gain for the BeltStati on Headset:
1. Press MENU to enter Menu Mode. From the Main Menu, select “Set Controls,” then “Mic Gain.”
2. While at the Mic Gain screen, talk into the headset microphone at a louder than normal level and adjust the Volume control
unti l the PEAK LEDs just start to light at the loudest parts of the audio. Press ENT to accept the changes.
Mic Gain can be set in the BeltStati on without acti vati ng the Talk butt on. This allows private mic gain adjustment during live
events. The Mic Gain can be set for each BeltStati on from the T-Desk applicati on.
When the Mic Gain is set too high, it is possible to induce feedback or echo. When set too low, words can be clipped by
the low level noise gate or sound too quiet to other listeners. Headsets by diff erent manufacturers or diff erent models
of headsets will require widely varying Mic Gain setti ngs. When setti ng microphone gain, it is best to err toward a setti ng
that is too low, rather than too high. This will help reduce unwanted echo in the system when that microphone is enabled.
iSelect Roaming – Selecti ng a BaseStati on
Installati ons with multi ple BaseStati on coverage zones oft en require users to move from one work zone to another
throughout the day. One of the ways Tempest handles these transiti ons is with iSelect™ On-Command Roaming. Using
iSelect, a user can easily change their communicati on from one BaseStati on to another BaseStati on in just a few seconds.
•
Confi rm that the BeltStati on has been paired with all required BaseStati ons.
•
Confi rm that there is an available slot on the desired BaseStati on. If no slot is open, power OFF one of the
connected BeltStati ons, wait for 15 seconds, and proceed.
•
Press MENU and select “Select Base.” Scroll to the desired BaseStati on and press ENTER. Press MENU to exit.
Tempest Wireless BeltStati ons remember the last 64 BaseStati ons to which they have been paired.