Clear-Com V12PDDXY - Manual (Page 96)

5.9 DIAL menu
The DIAL menu is provided on 1RU panels to allow users to dial telephone numbers. 2RU
and desktop panels also have a dial pad for dialing telephone numbers.
To use the DIAL facility, you must first set up a key on the panel to a TEL-14 interface
module. To dial out:
1. Select the TEL-14 interface module.
2. Use either the dial pad (if available) or the DIAL menu to dial the telephone number.
Figure 108: Dial menu for rack mounted panels
Figure 109: Dial menu for desk top panels
On lever key and pushbutton panels, pressing the up / down buttons under the numbers will
dial the numbers as they are selected and enter them into the dial display on the lower line
(shown as
XXXX ).
On rotary panels pressing the rotary control will select the left digit, while pressing the talk
button will select the right digit. Telephone numbers up to 30 digits in length may be
displayed.
If the initial number dial is unsuccessful, select the RELEASE key to release the telephone
line.
Select REDIAL to dial the number saved on the lower line of the display. If you exit DIAL
mode, the redial number is cleared.
96 V-Series Panels User Guide