Clear-Com V12PDDXY - Manual (Page 89)

The DIAGNOSTIC menu options are as follows:
Menu option Description / comments
SYSTEMDATA Displays the system data menu.
TEST TONE Selecting TEST TONE turns the LED indicator red and sends a 1KHz
test tone to the matrix output.
Selecting Test Tone again disables the tone, and turns off the red LED.
Exiting the DIAGNOSTIC menu also turns off the test tone.
RESET PANL Selecting RESET PANL resets the panel to factory defaults. It will also
delete all locally assigned keys and reset all crosspoint levels to the
factory default (0dB).
Panel brightness is reset to the brightness level configured for that
panel in ECS / EHX.
TEL RELEAS Selecting TEL RELEAS returns the user to the Direct Access Key
(DAK) page. If a telephone key is pressed the line is released.
Note:
The panel must also have Remote Line Release enabled in ECS /
EHX for this to take effect. This function can also be performed using
the up/down volume control buttons or rotary control.
UPGRADE Only displayed if an update is available from the matrix. Selecting this
option displays the UPGRADE menu.
Table 22:Diagnostic menu options
Tip: To return to the top level menu, press the Reply key or Reply key talk button
(DIAGNOSTIC).
89 V-Series Panels User Guide