Clear-Com V12PDDXY - Manual (Page 85)

Figure 89: Input levels menu (selected label mode) for desktop panels
The +0 dB represents the input level for the audio source of the label and may be adjusted
using the up and down buttons below the level display or the rotary encoder.
Select the RESET key or talk button to reset the input levels to the default of 0dB. Pressing
the Reply key or Reply key talk button (INPUT LEVEL) will return you to the Sort Group
menu.
Note:
When you set the input level for an audio source, you are setting the input levels for the
entire matrix and not just an individual panel.
Input and output settings can only be made for the local matrix. Gains for other matrices can
be achieved within ECS / EHX.
85 V-Series Panels User Guide