Clear-Com V12PDDXY - Manual (Page 66)

5.5.5 RESET XPTS (Reset Crosspoints) menu
The RESET XPTS menu enables you to reset the panel crosspoints to their default levels.
Press the YES key or pushbutton or talk button to reset the panel crosspoint levels to their
default settings or the NO key to cancel the operation and return the user to the local
preferences (LOCAL PREF) menu.
Tip: To return to the LOCAL PREF menu, press the Reply key / Reply key talk button
(RESET XPTS).
5.6 SYS CONFIG (System Configuration) menu
The SYS CONFIG (System Configuration) menu comprises menu options that enable local
panel configuration, input levels adjustment and output levels adjustment.
Note:
If the PIN code has been enabled in ECS / EHX, you must enter a PIN code entry before you
can access this menu.
On lever key or pushbutton panels, enter the PIN code using the volume up/down buttons
under each number. On rotary panels press the rotary encoder to select the left hand digit
and the talk button to select the right hand digit in the display. The PIN code digits will be
shown as
*
in the PIN code entry window.
Figure 64: System configuration menu on rack mounted panels
66 V-Series Panels User Guide